January 17, 2003

The car is going from blue to white. Andy has to peel off the clear protective coating which is applied by Autoshell.

This picture shows the roof being glued to the tail section. We use epoxy cabosil and a layer of carbon fiber.

When it's cured, we grind it with a slight radius and then apply the good old body filler.

Jack is the mudslinger.

I am the finish meister.

Andy is sanding the nooks and crannies.

Danny is preparing wheels for paint.

The wheels get painted base coat white and then dayglo red.

Here, the wheels are painted white.

The base coat needs to dry at least 45 minutes before applying the dayglo red. The webmaster is leaving so you'll get the update on the color tomorrow.

<<< Previous Update | Next Update >>>