October 13, 2003

Jack is helping Andy fit the nose and he's skinning the inside of the rear bumper.

This nose will be used for race purposes only.
You will see us fitting the standard RSR nose in the coming days.

The doors have already been pre-fit with the nose,
but I like to make sure that they all still fit together perfectly before I paint.

Jack is laying up the inside of the rear bumper where I extended it 2" wider on each side.

The brake hats were miss matched in color, so we are sending them for hard coat
(black, green, or gold are all acceptable). Mark is helping Martin re install the transmission.

We will now install axles and plump the gearbox cooler.

<<< Previous Update | Next Update >>>