906-127
May 15, 2004
I made
the door sill a couple of days ago but just pulled it from
the mold. Next, I'll trim and fit it. The tail has two coats
of duratech and now will be block sanded and primed signal
red.
Signal
red is the base primer. The final paint won't be applied until
after the tail is fit.
More detailed
shots.
All the
inside panels are now fit.
Notice
the oil cover and the impression on the door sill. This is
for one of the chassis tubes (clearance). Next week, we'll
be assembling suspensions and drive train components.
<<<
Previous Update | Next Update
>>>